Air compressor pressurizes air to produce huge amounts of energy that run your woodworking tools. It's only natural that you go out and buy Air tools.
However, all air compressors are not compatible with high-demand air tools. Also, you need to consider the number of tools that are going to be working all at once.
The duration of work is also an important factor. If you are a professional working on a large scale project, get a big one.
But if you do wood figurines and all you need is an air hammer, get a small portable one.
For the best air compressors for woodworking, go to www.ablesales.com.au
Before you buy an air compressor, you need to know about a few things. Read on to get the complete information for choosing the right air compressor for you.
CFM
The first thing that you need to know is cubic feet per minute. This is a measure of how fast air passes from the compressor to your tools.
The higher the CFM, the greater the workload the compressor can bear. So if you have big projects coming ahead, pick high CFM.
Saws and washers may need extra CFM. On the other hand, a nail gun does not need that much CFM.
Tank Size
The tank size of an air compressor is important as a large tank can hold more air. Some tanks can hold 1 gallon, and others hold 60 gallons.
If you have a big tank, then it means that your air tools will run longer. Once there is no more air, the motor turns on and compresses more air.
Most woodworking professionals don’t need enormous tanks. However, if you intend to use your tools for a long time, get a big tank.
PSI
PSI stands for pounds per square inch, and it measures pressure. It’s not that serious, but you still should get to know about it.
A small air compressor with a high PSI can compete with a big air compressor. An air compressor working at 150 PSI with a 2-gallon tank works just as fine as a 3-gallon tank 100 PSI model.
So, if you are a woodworker who needs the portability of a small air compressor, get the one with high PSI.
Horsepower
The horsepower is an old scale that is popular. It measures efficiency at a given CFM in motors. The higher the horsepower, the better.
Portability
Portability can be a driving factor in getting your air compressor. You might have to work at different locations, and for that, you need a small air compressor.
You should consider both the size and the shape of the air compressor. The shape might not be good for moving around, so keep that in mind.
When you are woodworking, portability can make a difference. So, if you need portability and power, get an air compressor that has a small tank and high PSI. That way, the air compressor will run longer than other small tank machines.
You might find small new air compressors that have handles. That would be perfect for you. But if you need more power, then sacrifice portability and go with one that has a big tank.
Check Noise Levels
The noise can be a nuisance, and sadly air compressors are noisy machines. You will find 87-decibel machines available in the market. This is an old standard, but you can get 60-decibel air compressors too now.
The 60-decibel air compressor is three times less noisy in comparison to the 87 decibel one. So it makes a lot of sense that you get the lowest decibel model.
Air Compressor For Woodworking
There are a lot of tools out there that are compatible with air compressors. With them, you can transform wood into furniture or artwork very quickly.
Here are some must-have tools that will transform your garage into a master’s workshop. Just make sure that you take good care of your tools.
Finish Nailer
This is an air tool for driving nails. All you have to do is pull the trigger, and the job is over instantly. So you don’t have to worry about hurting your thumbs or damaging the wood.
There are two types of finish nailers, and they are angled and straight. Both versions are great with tight spaces. You can find one within 150-200 dollars.
Reciprocating Saw
This is a compact tool that you can get within 120 dollars. It’s a saw that works in tight spots. Cutting is smooth and quick.
All you need is a little practice, and soon you will get the hang of it. You will be able to make instant clean cuts. But if you think that you need a bit more power, then you can get the full-sized one.
Random-Orbit Sander
You can find this tool in cabinetmaking and auto-body shops. The tool has a round pad that spins and vibrates, making it the perfect sander.
Compared to sandpaper, it is much smoother and faster. The air sander draws requires continuous air to work.
Conclusion
An air compressor is a machine that powers all your tools with the help of air. For woodworking, people usually buy a small air compressor with high PSI. This gives them the advantage of portability.
There are many factors that you should consider before getting an air compressor. It depends on the scale of your operation. Also, are you working alone, or do you have a team working in your project?
Furthermore, you need to ask yourself how much power all your tools requires. All these factors will determine what type of air compressor is best for you.
Other things that you need to know include CFM, tank size, PSI, horsepower, and noise levels. Finally, get yourself some great air tools here that will make your operation professional.
